Product Description
You must know this before you make your purchase! -There is no painting in this exhaust, Rust can come out over time, “solution” you applies high heat paint. -The chrome that is in the muffler would lose depending on the power of your engine. -This muffler is a little more Loud than the factory. -The muffler has a NPT thread, it is not possible to put it until the end, you will have 1/4 of thread outside which is normal. -This exhaust will change color due to the high heat generated by the engine. Please look at all the pictures to know if it will work on your application, compare all the measurements using a measuring tape to make sure it does not hit the fender or frame. Type of material: mild steel, Uncoated Steel. – Exhaust with Muffler! – 2 Lock washer and 2 nut included. *Gasket & Engine not included. Good for: … multipurpose. Weighs about: 21oz This been tested on 212cc (6.5hp) Predator Hemi 212cc, Honda GX160, GX200, also tested on Powerhorse 208cc, DuroMax 7 Hp (no tested on other engine) I think it works in all who are Honda clone. please check the measurements of your engine before you buy. center hollow to hollow 1″ 13/16 (see photos for details) Exhaust pipe Made in U.S.A.