Specifications
Continuous Rating: 275 Amps

DCIntermittent Rating: 455 Amps

DCMomentary Rating: 1250 Amps

DCVoltage Rating: 12-48V

DCOperation: On/Off

Terminal Stud Size: 2×3/8

Mounting: Recessed or Surface

Size: 69 (L)x69 (W)x75(H)mm/2.75×2.75×3 inch

Materials: ABS plastic housing

Water Resistance: Yes
What’s in box :1 x battery switch 4 x mounting bolts
Installation Tips:
Step 1: Remove Cables from Battery(You should always disconnect both the positive and the negative cables from the battery poles to ensure your safety.)

Step 2: Remove Negative Cable Terminal(Once you have both cables removed, you need to remove the terminal from the end of the negative one.)

Step 3: Wire in Switch(Wire it in between the cable and the battery terminal so that the switch will break the connection to the battery when it is off. Make sure when you add the switch that you install it in the “On” position.)

Step 4: Reconnect Terminal

Step 5: Screw Switch to Frame

Step 6: Connect Battery Cables