Vehicle Bolt Pattern: 4×4

Wheel Bolt Pattern: 4×4

Hub Bore: 66mm

Thread Pitch: 1/2″

Thickness: Each Spacer Measure 2″ Thick
Please ensure that the your vehicle has the same stuas the adapters, otherwise additional lugs WILL BE required Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle Installation neeto be performed by a trained professional It’s Possible that you OEM Stuare longer than the spacer is thick, if so you have a few options: Your lugs stuwill need to be shortened by grinding them down You can replace your stuwill shorter stuif you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush) ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS