2 inch Golf Cart Wheel Spacers for EZGO Club Car Yamaha 4 Pack, Black-2 Inch wheel spacers for EZGO, Club Car & Yamaha golf cart, add 4 inches to the wheel axle track to allow for larger, wider or higher traction tires/rims/wheels and a more aggressive look. – Golf cart wheel spacers made of quality CNC-machined aluminum, light weight, durable and strong. The kit will add 4 inches to the wheel axle track to allow for larger, wider or higher traction tires/rims/wheels.- Size: 2″ (50mm) thickness, 4 x 2.8″ (72mm) bolt pattern, 3.68 ” (68mm) hub center bore, and 16 pcs 1/2″-20 external nuts (internal use of original nuts).- Easy to install: A torque wrench(not included) is all you need to finish the installation. Note: Never use air tools or impact wrenches. Black golf cart wheel spacers specification:Thickness: 2″ (50mm)Bolt Pattern: 4×2.84″ (72mm)Hub Center Bore: 3.68″ (68mm)Nut Thread Size: 1/2 x20Material: Aluminum, ChromePackage Included: 4 x wheel spacer, 16 x lug nuts PLEASE READ CAREFULLY BEFORE ORDERING:Ensures CompatibilityBolt Pattern: Check you bolt pattern fits 4×2.84″(72mm)Central Hole: You hub’s central hole must be same or smaller than 2.68″(68mm)Stud Length: Your cart’s wheel studs must be shorter than 2″(50 mm). Make sure the wheel studs/lug nuts are not in contact with the rear of the wheels. You can grind the nuts shorter or replace them with shorter nuts.Clearance of the Fender: The thickneof the 4 lug wheel spacer should be lethan the fender clearance for vehicles without lift kit.Please use a torque wrench and tighten the nuts in a professional installation sequence. Be aware of the angle of the nuts.Please check and re-torque all hardwares after 25-50 miles.