12V Waterproof Push-Button On-Off Switch with quick connector for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc
Push Button Switch with waterproof rubber boot
Ideal for any 12 volt DC application requiring a waterproof on-off push button switch.
Works great for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc
with 3M taple on pack and quick connector easy install
The On/Off Switch is a spare part with the light kit, as the controller have power consumption when it is not use, it will drain about 7 mA current, so an on/off switch is very important to disconnect power when the bike was kept for long term storage. 12V Waterproof Push-Button On-Off Switch with quick connectorPush Button Switch with waterproof rubber boot.Ideal for any 6-14 volt DC application requiring a waterproof on-off push button switch.Works great for LED Accent Lighting on Motorcycles, Cars, Trucks, ATVs, Golf Carts, etc.Included : 1pc 12V Waterproof Push-Button On-Off Switch with 3M taple on pack1pc quick connectorFeatures: – Waterproof Push Button boot – Single pole switch -Easily mounts using 3M double sided tape (included) -Rectangular base measures .1.96inch*0.98inch*0.78inch – Rubber boot unscrews for flush mounting
Included : 1pc 12V Waterproof Push-Button On-Off Switch with 3M taple on pack1pc quick connectorFeatures: – Waterproof Push Button boot – Single pole switch -Easily mounts using 3M double sided tape (included) -Rectangular base measures .1.96inch*0.98inch*0.78inch – Rubber boot unscrews for flush mounting
1. The On/Off Switch include a 3M tape to stick the switch on where you want to install it.
1. There is a quick connector include for easy connection, Find the red power wire on the controller, take away the battery ring from the wire and use the quick connector to connect the power wire of the controller with the wire of the On/Off switch, please see the guild as above Step 1: Gently insert stripped wire into the connector Step 2: Use the crimp to get the desired grip
Step 3: Apply heat evenly unit the tube shrinks Step 4: Inspect your waterproof quality connectionand the adhesive flows1. In case you have not the crimp and the heater, you can simply twine the both wire together and wrap insulated rubber tape for safety.