1. Remove the wheel and tire: Before you can replace the disc brake rotor, you must first remove the wheel and tire. Use a jack to lift the cart, and then place a jack stand under the frame for support. Use a lug wrench to remove the wheel and tire from the golf cart.

2. Remove the caliper: Use a wrench to remove the two bolts that hold the caliper onto the spindle. Carefully pull the caliper off the rotor. If it is stuck, use a rubber mallet to tap it off. Hang the caliper from the frame with a zip tie or bungee cord so the brake line is not stretched.

3. Remove the rotor: Use a hammer and chisel to break the wheel studs free. Then, use a large screwdriver to pry the rotor off the hub.

4. Install the new rotor: Place the new rotor onto the hub and press it on with a large screwdriver. Then, replace the wheel studs and torque them to the correct specification.

5. Reinstall the caliper: Slide the caliper onto the rotor and use a wrench to tighten the two bolts.

6. Reinstall the wheel and tire: Place the wheel and tire onto the hub and tighten the lug nuts by hand. Then, use a torque wrench to torque the lug nuts to the correct specification.

7. Test the brakes: Once the wheel and tire are installed, test the brakes to make sure the rotor is installed correctly and the brakes are functioning properly.

“Keyword”
“how to replace golf cart brakes”
“how to replace disc brake rotor bike”