Increase your IQ golf carts speed without a loss in torque, without replacing your gears, or any motor/controller upgrades.Most can expect to see 2-8 MPH gain depending on the health of your batteries.
Our parts meet or exceed OEM quality standards.
FLIP YOUR TOW/RUN SWITCH BEFORE INSTALLATION. Simply jack up the rear of your cart, remove your passenger side tire, remove (2) screws holding speed sensor to motor, replace magnet in motor, and re-install!
Fits the Following Cart(s): Club Car (IQ) models with ADC motor ONLY!
Installation Instructions:
1: Flip the Tow/Run Switch to the TOW position (this should be done whenever you are servicing the cart)
2: Disconnect main positive and negative battery cables to your cart
3: Remove the ADC speed sensor from the end of your cart motor
4: Now you can gain access to the magnet. Simple remove the magnet by using a small flat head screwdriver or socket
5: Install the new magnet in the same position you just remove the old magnet from
6: No just re-install the speed sensor, re-attach the battery cables, and run the Tow/Run switch back to the RUN position.