1. Park the golf cart in a level area and set the parking brake.

2. Take off the oil filter cover. This is usually located on the side of the engine.

3. Place a drain pan underneath the filter and unscrew the filter from the engine.

4. Once the filter is removed, wipe the area around the filter with a rag to remove any dirt or debris.

5. Take the new oil filter and apply a thin layer of oil to the gasket.

6. Screw the new filter into place and make sure it is secure.

7. Replace the oil filter cover.

How to clean golf cart oil filter:

1. Start by removing the oil filter. Do this by unscrewing the filter from its housing. Make sure to use a filter wrench if necessary.

2. Take the filter and submerge it in a container filled with warm soapy water. Let it soak for a few minutes.

3. Use a brush to scrub off any dirt or debris that may be stuck on the filter.

4. Rinse the filter off with clean water and let it dry.

5. Once the filter is dry, use a new filter or re-install the old one. Make sure to apply a thin coat of oil to the gasket before installing the filter.

6. Put the filter back into its housing and tighten the bolts to secure it in place.

7. Make sure to reset the oil pressure and check for any leaks after reinstalling the filter.

“Keyword”
“changing golf cart oil”
“how to change oil golf cart”