Things to be Considered
Wiring lights on a golf cart is simple, but there are a few things you should know before you begin.
Select Light Position
First, pick where you want your lights to be installed. Most people put the lights near the front and back of the cart, but you may place them anywhere you choose.
Select the Appropriate Sort of Lighting
The next step is to decide what kind of lighting you want to use. Lights of many varieties are available, ranging from headlights and tail lights to spotlight and work lights.
Select the Size and Form of the Light
After deciding on the sort of light to utilize, you must select the size and shape of the light. There are several sizes and types of lights available, so it is critical to select one that will complement the rest of the golf cart.
Choose Between a Single and a Double Battery
Finally, you must determine how you intend to wire lights. There are two methods for wiring lights on a golf cart: one golf cart battery or two golf cart batteries.
- A Single Golf Cart Battery
If you connect the lights to a single battery, they will all be powered by the same battery. This is quicker to install, but it puts a burden on the battery and causes it to expire sooner than if the lights were wired with two batteries.
- Double Golf Cart Battery
If you attach the lights to two batteries, each light will have its own battery. This is harder to install, but it will make your batteries last longer.
Once you’ve decided on the placement, kind, size, and form of your light, as well as how you want to wire it, you may proceed with the following steps:
1. Choose a Suitable Light
Choose a set of 36 or 48-volt head and tail lights if you want to use the golf cart lights regularly but don’t want to spend the money on a voltage reducer. These golf cart battery chargers connect to all of the batteries in the pack and draw them all down at the same time. The golf cart battery charger then equally recharges them all, and life is good!
2. Mark and Pinpoint the Light Installation Area
Because golf carts might have up to six batteries, disconnect the negative terminal from each one. The batteries are located beneath the front seat. Mark where you want to install the headlights.
Mount them as high as possible for the best visibility.
Clamp the headlights using the mounting brackets.
Clamp the brackets’ opposite end to the bumper or roll bar.
Locate and install the toggle switch that controls the lights. This switch is often located on the left side of the steering wheel, but you can choose the placement that works best for you.
3. Install your Headlights
Drill a 12-inch hole in the location where you want to put the switch. The threaded section of the switch may be a different size, so double-check to ensure that the 12-inch hole will fit the component.
Before drilling, make the necessary size modifications to the size of the hole.
Connect one end of the lead to the positive battery terminal with the integrated fuser holder. To connect these parts, you’ll need a solderless ring terminal.
4. Activate the Headlights
Extend the lead to the toggle switch’s center terminal.
Connect the lead to the switch using an insulated female spade terminal.
Obtain a 16-gauge wire. Connect it from the toggle switch at the second terminal to the headlights. To connect the wire to the headlights, use a solderless butt connection. Nylon wire ties are used to secure the wires. It is critical to ensure that the cables are securely fastened. Make sure to cover the connections with electrical tape. (1)
Install the toggle switch. Connect it to the hole and use the screw to secure it.
5. Turn on Your Headlights
Reconnect all of the batteries’ negative connections. Ensure that all terminals are reconnected to their original places. Turn the toggle switch to the on position to test the lights. Check your wiring and battery connections if the lights do not come on.
“Keyword”
“how to wire lights on golf cart”
“how to wire led lights to golf cart”
“how do you wire 12 volt lights to a 48 volt golf cart”
“how to wire turn signals on a golf cart”
“what wires go where on light switch”
